AUTOMATIC CORRUGATED 2 PLY PRODUCTION LINE

Slotting Unit

• Slotted cutter wheel form: double blade single shaft.
• Alloy steel material is heat treated and ground with serrated slot blade, good hardness and toughnass.
• Pressure wheel, blade holder traverse move, phase adjustment, reset, etc. All adopt computer contral(automatic or manual) electric control, change orders quickly.
• The upper and lower knives are move together, and the cutter is positioned in the siat to ensure the synchronous movement of the left and right sides of the knite seat. The separate lower blade is convenient for maintenance and replacement, and the life of the cutter is extended
• Pre-pressure transmission, the surface of the pre-pressing wheel is wrapped with superiar rubber. avoid damage the cardboara
• The pressure line wheel is embedded with rubber, and the position of the pressure line wheel can be adjusted simultaneously with the slotted tool holder.
• Medium knife lateral displacement structure, wide adaptability to production.
• Flexible corner cutter structure, three-layer, five-layer cardboard cutting angle does not need to be adjusted
• Precision linear guide, with ball screw, makes the slotted tool holder move more flexible and accurate.
• Optional: double-pole double-axis siotting unit.

Die Cutting unit

• Equipped with imported quick change type polyurethane rubber, easy to change, with one-way clutch as linear velocity compensation function, Ensures the rubber wear before and wear after die cut out the cardboard is same
• In the work, the die-cut rubber roller mat is mechanically spirally left and right automatically traversed ( 20mm), so that the notch marks are not repeated, and the life of the rubber is extended.
• The gap between the rubber roller and the die-cut roller is pneumatically controlled. When feeder paper is normally, the rubber roller is lowered to the working position, and the rubber roller is automatically raised when feeder paper is stopped
• Die-cutting roller horizontal computer control, electric adjustment, amplitude modulation $ 10mm.
• Rubber roller mat correction mechanism to increase the number of times the pad is used and reduce consumption.
• The bottom of the die-cutting is equipped with a waste paper conveying device to transport the die-cut paper scraps outside the equipment for easy cleaning

Count and output unit

• Counting and out put unit is adopt up stack..
• It is composed of three sets of servo motors to form accurate counting. stacking and output functions under high-speed operation.
• Computer control automatic setting code carton number.
• Strong air pressure device to make the cardboard down smoothly after glue.
• Fully Pat, correction device to effectively improve the scissors.
• The behind baffle can be adjusted automatically or manually according to the cardboard specifications.
• Automatic emergency stop when cardboard discharge is not smooth.
• Pneumatic paper pushing mechanism, high-speed stacking of stacked cartons.
• Electric left and right move device (aligned to the center).